Samsung SNR-6400 User Manual Download Page 74

Page: 74 / 112

Network Video Recorder SNR-6400/3200

While a backup task is in progress, the

button is displayed. To abort the backup

process, click the

button. (Video files that are downloaded prior to aborting the

backup will be saved in the backup directory.)

To change the download folder, click the

button.

Backing up video files automatically creates a sub folder under the designated download folder.

The sub folder is named after the product IP address, e.g., SNR-6400_Backup_192.168.1.100,

and contains the backup video files.

Backup video files are playable with SLiM Player. To download SLiM Player, click the

button at the bottom of the page.

Note

The buttons and functions of SLiM Player are as listed below.

Summary of Contents for SNR-6400

















































































































Search results

Summary of Contents for SNR-6400

Reviews:

Related manuals for SNR-6400

Brands by name

Popular brands

Samsung SNR-6400, User Manual

Search results

Summary of Contents for SNR-6400

Reviews:

Related manuals for SNR-6400

Brands by name

Popular brands