Samsung SNR-6400 User Manual Download Page 94

Page: 94 / 112

Network Video Recorder SNR-6400/3200

1. Select 1. Individual HDD, and then press Enter.

Use

∧

and

∨

to select the number for the external HDD bay containing the HDD to format,

and then press Enter.

Upon pressing Enter, the following messages appear while the selected HDD is being

formatted. To move back to the previous phase, press ESC. To cancel formatting and move

back to the main screen, hold down ESC for 2 seconds or longer.

When selecting an HDD that is not available or connected, the following message appears.

5.5.4. Formatting All External HDDs

Under HDD Format, select 2. External HDD, and then press Enter.

Use

∧

and

∨

to select the number for the external HDD bay containing the HDD to format,

and then press Enter.

2. Select All HDD in Bay[#], and then press Enter.

External Bay[1]
is not connected!!

HDD Format
[DONE]

Formatting HDD
is in Progress...

Format Bay[1]?
Yes: Enter No: Esc

1. Individual HDD
2. All HDD in Bay[1]

Bay Number to format
External Bay [1]

Format HDD [1]?
Yes: Enter No: Esc

HDD Number to format
Internal HDD? [1]

Summary of Contents for SNR-6400

















































































































Search results

Summary of Contents for SNR-6400

Reviews:

Related manuals for SNR-6400

Brands by name

Popular brands

Samsung SNR-6400, User Manual

Search results

Summary of Contents for SNR-6400

Reviews:

Related manuals for SNR-6400

Brands by name

Popular brands