Samsung SNR-6400 User Manual Download Page 95

Page: 95 / 112

User’s Manual

Upon pressing Enter, the following messages appear while the entire HDDs of the selected

external bay are being formatted. To move back to the previous phase, press ESC. To cancel

formatting and move back to the main screen, hold down ESC for 2 seconds or longer.

5.5.5. Formatting All HDDs

Under HDD Format, select 3. All HDD and then press Enter.

Upon pressing Enter, the following messages appear while all HDDs—both internal and

external—are being formatted. To move back to the previous phase, press ESC. To cancel

formatting and move back to the main screen, hold down ESC for 2 seconds or longer.

HDD Format
[DONE]

Formatting HDD
is in Progress...

HDD Format
[DONE]

Formatting HDD
is in Progress...

Format All HDD?
Yes: Enter No: Esc

Summary of Contents for SNR-6400

















































































































Search results

Summary of Contents for SNR-6400

Reviews:

Related manuals for SNR-6400

Brands by name

Popular brands

Samsung SNR-6400, User Manual

Search results

Summary of Contents for SNR-6400

Reviews:

Related manuals for SNR-6400

Brands by name

Popular brands