6.4.2. Iomega NAS
Running Iomega NAS Discovery
1. Connect IomegaNAS device to network
2. Start your computer, wait for the operating system to load, then insert the Solutions CD.
NOTE:
The client computer must be on the same subnet or network segment as the Iomega NAS.
3. The registration application should open automatically. Register your Iomega NAS system by following
the on-screen instructions. When the Solutions CD menu appears, select
Iomega NAS Discovery
Utility
. Select
Click to Open
to run the software.
NOTE:
If the software doesn't run automatically, click the CD icon in My Computer, then double click
the
Start
icon.
4. The Iomega NAS Discovery software will list all discovered Iomega NAS servers.
NOTE:
See Troubleshooting if Iomega NAS Discovery does not find your Iomega NAS.
NOTE:
By default, the Iomega NAS is set to obtain its IP address from a DHCP (Dynamic Host
Configuration Protocol) server. Click on the
IOMEGANAS-xxxxx
name and then the
Manage
button. If
your network has a DHCP server running, the Iomega NAS will obtain its IP address from the DHCP
server and launch the NAS management utility.
5. If your network does not have a DHCP server, UNKNOWN will appear in the status column of the
Iomega NAS Discovery utility. Click on the
Manage
button to enter the appropriate IP address and
subnet mask.
NOTE:
Numbers are for example only. Please enter an IP address and subnet mask appropriate for
your network
46
Summary of Contents for SNR-16A
Page 1: ......
Page 42: ...Recorder program Total hard disk space and free space 42 ...
Page 51: ...51 ...
