Samsung SN6000 Series User’s Manual
About Drivers and System Resources 85
If you are unable to transfer files with the infrared port, check the
following:
Make sure the Serial port B field in System Setup is set to 2F8,
IRQ 3. The field is in the Advanced Menu under I/O Device
Configuration.
The receiving device must be positioned properly. There must
be no more than three feet (or one meter) of distance between
the computer’s infrared port and the receiving infrared device.
The sending and receiving devices need to be on the same level
vertically. Place them on the same table if possible.
Make sure the infrared ports on the sending and receiving
devices face each other, with no more than a 30 degree angle
between the two infrared ports.
Make sure that nothing is obstructing the file transfer path
between the computer’s infrared port and the receiving infrared
device.
If you still cannot transfer a file, see the documentation for the
infrared software.
Service Pack 3 for Windows NT 4.0
Microsoft
®
Service Pack 3 (SP3) is included with computers shipped
from the factory with Windows NT installed. Any time you change or
add components to your Windows NT system, you need to reinstall
SP3.
The version of SP3 on your computer’s hard drive includes the correct
video driver for your system. If possible, always install this version on
your computer.
To install SP3:
1. Run the executable file. On your computer’s hard drive this file
is located at C:\SP3\I386\update.
2. Follow the instructions on the screen with these exceptions:
a. When you are prompted to overwrite the uninstall
directory, click the Yes button.
