Samsung SHR-4160N User Manual Download Page 131

Page: 131 / 196

10-24

●

DVR(SHR-4160N/P)/SITE Connection
- Same as “DVR(SHR-4160N/P)/SITE Connection” of Monitoring Mode.

●

Remote Mode
- This mode sends out the video data recorded in SHR-4160N/P to Network for

play.

- Up to 4 channels are allowed for simultaneous search and play.
- The video information at the time indicated by TimeBar will be displayed in the

Play screen.

Clicking enters Remote Mode.

●

DVR(SHR-4160N/P) Selection/Change by SITE
- Choose out a SHR-4160N/P from the connection list for search.
- SHR-4160N/P turns black if connected with the authority of ADMIN and gray with

the authority of USER.

- Search function is for administrator only.

Summary of Contents for SHR-4160N





































































































































































































Search results

Summary of Contents for SHR-4160N

Reviews:

Related manuals for SHR-4160N

Brands by name

Popular brands

Samsung SHR-4160N, User Manual

Search results

Summary of Contents for SHR-4160N

Reviews:

Related manuals for SHR-4160N

Brands by name

Popular brands