Samsung SHR-4160N User Manual Download

Page: 106 / 196

SHR-4160N/P USER’S MANUAL

9-5

●

Use the weekday/time information in the backup image to search images
contained in as many as 4 channels.

●

Click

❷

, [Enter] to select a channel and the box on the right of CH No.

shall be checked.

●

After channel selection, click the

❷

button to move to the time search line.

Click [Enter] to change the search time. The search time may be changed by
Year/Month/Day/Hour/Minute/Second by clicking

❷

. For your convenience,

just keep pressing a button and the value will continue to change.

●

Click [Start] to start searching and [Cancel] to return to the previous menu.

●

The time information in the bottom left corner, 2004-03-06 17:47:27 indicates
when to start replay.

●

Click the [9-16] button to see the information on CH 9~16 respectively.

1-2. USB Device Search

●

Select an external USB device to search a date.

Summary of Contents for SHR-4160N





































































































































































































Search results

Summary of Contents for SHR-4160N

Reviews:

Related manuals for SHR-4160N

Brands by name

Popular brands

Samsung SHR-4160N, User Manual

Search results

Summary of Contents for SHR-4160N

Reviews:

Related manuals for SHR-4160N

Brands by name

Popular brands