background image

11-14

Timeline

- Displays the time when the video image was recorded in the current device for

the date selected from the Calendar window.

- The General mode displays the information for 24 hours from 0 to 24 o’clock and

the Zoom mode displays the time information every 2 hours.

[General Mode]

!

This mode is displayed in the Play screen and the CH will be activated in the
white background.

@

Timeline: Displays the time information on the video data recorded in the cur-
rent device.

#

Time Bar: Displays the current time of the video image in play.

[Enlargement Mode]

!

Displays the timeline one hour earlier.

@

Displays the timeline one hour later.

Note

Note

Double-click the Time Bar surrounding area to return to the Zoom mode.
Each column of Timeline corresponds to one hour.
The Timeline color changes according to the recording condition, Green(Normal),
Red(Panic), Orange(Alarm), Blue(Motion), Yellow(Schedule), or Purple(Video Loss).

Note

Note

Double-click the Time Bar surrounding area to return to the General mode.
Each column of Timeline corresponds to 5 minutes.
The Timeline color changes according to the recording condition, Green(Normal),
Red(Panic), Orange(Alarm), Blue(Motion), Yellow(Schedule), or Purple(Video Loss).

!

!

@

#

@

Summary of Contents for SHR-4160N





































































































































































































Reviews: