Samsung SHR-4160N User Manual Download

Page: 118 / 196

SHR-4160N/P USER’S MANUAL

10-11

●

Time Information

- As soon as you are Connected to SHR-4160N/P, the date, weekday, and time of the

set to which the selected channel is connected.

- If SHR-4160N/P is not connected, the present date, weekday, and time of the user's

PC are displayed.

●

Connection Information

- As soon as you are connected to SHR-4160N/P, the connection button will

display connection status.

- If you click the connection button here, connection will be cancelled.

●

Play Screen OSD Information

Channel no., camera name, and video size will be displayed.

Video Size (C) CIF / (N) Normal / (L) Large

The Video data of the current channel are recorded in your PC with REC mark

displayed.

Audio ON/OFF Button is marked.

Displays the name, IP address, and play time of the current SHR-4160N/P.

The current channel alarm status is displayed.

Possibility of the current channel PTZ controllability is displayed.

Summary of Contents for SHR-4160N





































































































































































































Search results

Summary of Contents for SHR-4160N

Reviews:

Related manuals for SHR-4160N

Brands by name

Popular brands

Samsung SHR-4160N, User Manual

Search results

Summary of Contents for SHR-4160N

Reviews:

Related manuals for SHR-4160N

Brands by name

Popular brands