10
Using the Travel Charger
Important!
Verify that the handset battery is installed prior to
connection. If the battery is not properly installed and
the wall charger is connected, the handset may power
off and on continuously, preventing proper operation.
1.
Plug the flat end of the Travel Charger into the Power/
Accessory Interface connector and the other end into a
standard AC wall outlet.
2.
When charging is finished, remove the flat end from the
interface connector jack on the phone.
Warning!
If your handset has a touch screen display, please note
that a touch screen responds best to a light touch from
the pad of your finger. Using excessive force or a metallic
object when pressing on the touch screen may damage
the tempered glass surface and void the warranty.
Note:
Failure to unplug the wall charger before you remove the
battery, can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
) blinks and the device sounds a
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power, not by turning off the
backlight, but by entering the dimming mode. For a quick check
of your battery level, glance at the battery charge indicator
located in the upper-right corner of your device’s display. Solid
color (
) indicates a full charge.
When the battery level becomes too low, the phone automatically
turns off.
Correct
Incorrect
