Samsung SF-340 User Manual Download Page 52

Page: 52 / 81

SING

NTING

7.5

RINTING

SING

NTING

RINTING

RINTI

SING

NTING

Uninstalling Software

Uninstallation is required if you are upgrading the software or if your installation fails. You can uninstall the

item using the Windows uninstallShield.

You can select

Start

Programs

Samsung SF-340_CF-340Series

Maintenance

• Otherwise, Insert the supplied CD-ROM into your CD-ROM drive.

Click

Remove

Then you will see a component list so that you can remove any of them individually.

After selecting items you wish to remove, click

Next

When your computer asks you to confirm your selection, click

Yes

• The driver is removed from your computer.

When the uninstallation is done, click

Finish

The message box recommends you restart your computer. Click

, then restart your computer.

Printing a Document

This procedure describes the general steps required for printing from various Windows applications. The exact

steps for printing a document may vary depending on the application program you are using. Refer to the user’s

guide of your software application for the exact printing procedure.

The following steps describe the typical process to print from Windows:

Ensure that your machine is properly connected to the computer, the machine is powered on, and there is

paper in the paper tray.

Verify that you have installed the Samsung software for your computer. For details, see “Installing Sam-

sung Software” on page 7.2.

Start the program you are using to create the document, and create or open the document you want to print.

Choose

Print

Print Setup

from the

File

menu. The Print window is displayed (It may look slightly dif-

ferent depending on your application). Make sure that Samsung SF-340_CF-450 Series is selected as your

default printer.

• You can select the basic print settings within the Print window. These settings includes the number of copies and the

print range.

Summary of Contents for SF-340


















































































Search results

Summary of Contents for SF-340

Reviews:

Related manuals for SF-340

Brands by name

Popular brands

Samsung SF-340, User Manual

Search results

Summary of Contents for SF-340

Reviews:

Related manuals for SF-340

Brands by name

Popular brands