Samsung SCX 6322DN - B/W Laser - All-in-One Service Manual Download Page 79

Page: 79 / 185

Service Manual

Troubleshooting

6-2

Samsung Electronics

6.2 Solution

6.2.1 Scanner

6.2.1.1 COPY

White copy

• Check the Scan-Cover open.

• Room light can transit a thin original.

• Check shading profile.

• Remake shading profile in the tech mode.

Black copy

• Check the CCD problem in Main PBA.

• Check the CCD harness contact.

• Check shading profile.

• Remake shading profile in the tech mode.

Defective image quality

• Check shading profile.

• Remake shading profile in the tech mode.

• Check the gap between original and scanner.

• The gap above 0.5mm can cause a

glass

blurred image.

• Check printing quality.

• See “Print” troubleshooting.

Abnormal noise

• Check the Scanner Motor and any mechanical

• Check the right position of the Scanner

disturbance.

Motor, and check the any mechanical dis

turbance in the CCD carriaging part.

• Check the Motor Driver in Driver PBA.

• If any driver is defective, replace it.

PROBLEM

ITEMS TO BE CHECKED.

HOW TO SOLVE

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One


























































































































































































Search results

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 6322DN - B/W Laser - All-in-One

Brands by name

Popular brands

Samsung SCX 6322DN - B/W Laser - All-in-One, Service Manual

Search results

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 6322DN - B/W Laser - All-in-One

Brands by name

Popular brands