Samsung SCX 6322DN - B/W Laser - All-in-One Service Manual Download Page 35

Page: 35 / 185

Service Manual

Alignment & Adjustments

4-8

Samsung Electronics

In the paper exit area

1. Press the release lever to open the side cover.

2. Open the front cover.

3. Pull down on the fuser lever. This will release pres-

sure on the paper.

4. Turn the Jam Remove Lever in the direction of the

arrow to move the paper to the exit area, then
gently pull the paper out through the exit area.

5. Push the fuser lever up.

6. Turn the Jam Remove Lever back to the original

position.

7. Close the front cover

and the side cover

Printing automatically resumes.

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One


























































































































































































Search results

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 6322DN - B/W Laser - All-in-One

Brands by name

Popular brands

Samsung SCX 6322DN - B/W Laser - All-in-One, Service Manual

Search results

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 6322DN - B/W Laser - All-in-One

Brands by name

Popular brands