Samsung SCX 6322DN - B/W Laser - All-in-One Service Manual Download Page 40

Page: 40 / 185

Alignment & Adjustments

Service Manual

4-13

Samsung Electronics

4.4 Tech Mode

4.4.1 How to Enter Tech Mode

In service (tech) mode the technician can check the machine and perform various tests to help with failure
diagnosis.

When in Tech mode the machine still performs all normal operations.
While in Tech mode the machine still performs all normal operations.

To enter the Tech mode (SCX-6122FN)

To enter the Tech mode press in sequence and the LCD

briefly displays

‘TECH’,

the machine has entered service (tech) mode.

To enter the Tech mode (SCX-6322DN)

To enter the Tech mode press in sequence and the LCD

briefly displays

‘TECH’,

the machine has entered service (tech) mode.

4.4.2 Engine Test Mode

The Engine Test Mode supplies useful functions to check the condition of the print engine. It tests the condition of
each device and displays the result of the test on the LCD. It is divided into 7 functions (0~6), and these are shown
below.

To enter the Engine Test mode (SCX-6122Fn)

Press

in sequence, and the LCD briefly displays

‘Engine Test’,

the machine has entered Engine Test Mode.

Press “0”, “1”, “2”, “3” or “4” to select the Test No. (see list below – left hand column)

To enter the Engine Test mode (SCX-6322DN)

Press

in sequence, and the LCD briefly displays

‘Engine Test’,

the machine has entered Engine Test Mode.

Press “0”, “1”, “2”, “3” or “4” to select the Test No. (see list below – left hand column)

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One


























































































































































































Search results

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 6322DN - B/W Laser - All-in-One

Brands by name

Popular brands

Samsung SCX 6322DN - B/W Laser - All-in-One, Service Manual

Search results

Summary of Contents for SCX 6322DN - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 6322DN - B/W Laser - All-in-One

Brands by name

Popular brands