A.12
Labels
C
AUTIONS
:
• To avoid damaging the machine, use only labels recommended for laser printers.
• To prevent serious jams, always use the manual feeder to print labels and always use
the rear output tray.
• Never print on the same sheet of labels more than once and never print on a partial
sheet of labels.
When selecting labels, consider the quality of each component:
•
Adhesives: The adhesive material should be stable at 208°C (406.4°F), the machine’s
fusing temperature.
•
Arrangement: Only use labels with no exposed backing between them. Labels can
peel off sheets with spaces between the labels, causing serious jams.
•
Curl: Prior to printing, labels must lie flat with no more than 13mm (5in.) of curl in
any direction.
•
Condition: Do not use labels with wrinkles, bubbles or other indications of separation.
Transparencies
Transparencies used in the machine must be able to withstand 165°C (329°F), the
machine’s fusing temperature.
C
AUTION
: To avoid damaging the machine, use only transparencies recommended for
use in laser printers.
Summary of Contents for scx-4100 series
