Samsung scx-4100 series User Manual Download Page 23

Page: 23 / 169

ETTING

TARTED

1.6

Installing the Toner Cartridge

Open the front cover.

Remove the starter toner cartridge from its bag. Don’t use
a knife or other sharp object as it might scratch the drum of

the cartridge.

Gently roll the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.

Thoroughly rolling the cartridge will assure the maximum

copies per cartridge.

AUTIONS

• To prevent damage, do not expose the toner cartridge to light for

more than a few minutes. Cover it with a piece of paper if left

exposed for more than a few minutes, and keep it flat and clean

place.

• If toner gets on your clothing, wipe it off with a dry cloth and

wash clothing in cold water. Hot water sets toner into the fabric.

Summary of Contents for scx-4100 series










































































































































































Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands

Samsung scx-4100 series, User Manual

Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands