Samsung scx-4100 series, User Manual

Page: 34 / 169

G
ETTING
S
TARTED
1.17
1
Installing Samsung Software
N
OTES
:
• Cancel the “ New Hardware Found ” window when your
computer boots up.
• Make sure that your machine is turned on and connected to your
computer’s parallel port or USB port before installing
software . Windows 95 and Windows NT 4.0 do not support the
USB connection.
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an installation
window appears.
If the installation window does not appear, click Start and
then Run . Type X:\Setup.exe , replacing “ X ” with the
letter of your drive and click OK .
2
When the following window opens, connect your machine to
the computer and turn the printer on. Then click
Next .
If the machine is already connected and turned on, this
screen does not appear. Skip to the next step.
N
OTE
: If you click Next and the machine is not connected to the
computer, an alert message window appears. After connecting the
machine and turning it on, click Yes . Or, if you want to install the
software without the machine, Click No .