Samsung scx-4100 series User Manual Download Page 97

Page: 97 / 169

CANNING

5.2

Scanning Basics

Your machine offers two ways to scan:

• From the Samsung SmarThru software: Launch Samsung

SmarThru and open the Scan To to begin scanning. See

below.

• From TWAIN-compliant software: You can use other software

including Adobe PhotoDeluxe and Adobe Photoshop. See

page 5.6.

OTES

• To scan with your machine, you must install the MFP driver.
• Scanning is done through the same LPT or USB port currently

assigned for your printer port.

Scanning Using Samsung SmarThru

Samsung SmarThru is the accompanying software for your

machine. With the SmarThru, scanning becomes a pleasure.

Follow these steps to start scanning using the SmarThru:

Make sure that your machine and computer are turned on
and properly connected to each other.

Lift the document cover.

Summary of Contents for scx-4100 series










































































































































































Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands

Samsung scx-4100 series, User Manual

Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands