IEEE1394 Data Transfer
■
CPU: faster Intel
®
Pentium III™ 450MHz compatible.
■
Operating system: Windows
®
98SE, ME, XP, Mac OS (9.1~10.2)
■
Main memory: more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
1. Set the
Power
switch to
PLAYER
.
2. Set the
Mode
switch to
TAPE
.
3. Connect the DV cable (not supplied)
from the DV jack of the Camcorder
to the DV jack of the other DV device.
■
Make sure that
is displayed on
the LCD screen.
4. Press the
Start/Stop
button to begin
REC PAUSE
mode.
■
PAUSE
is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the
picture.
6. Press the
Start/Stop
button to start recording.
If you want to pause recording momentarily, press the
Start/Stop
button again.
7. To stop recording, press the
(STOP) button.
[ Notes ]
■
When using this Camcorder as a recorder, the pictures that appear
on an external monitor may seem distorted, however recorded
pictures will not be affected.
■
Operation is not guaranteed for all the recommended computer
environments mentioned above.
Recording with a DV Connection Cable
System Requirements
ENGLISH
79
79
IEEE1394
■
CPU Intel
®
Pentium III™ 450MHz
■
Windows
®
98SE ME XP Mac OS 9.1 10.2
■
64MB RAM
■
IEEE1394
IEEE1394
1.
PLAYER
2.
TAPE
3.
DV
DV
DV
DV
■
4.
Start/Stop
/
REC PAUSE
■
PAUSE
5.
DV
6.
Start/Stop
/
Start/Stop
7.
STOP
■
■
DV
DV
USB
AV/
S