Basic Recording
✤
The Zero Memory function works in both Camera and Player
modes.
✤
You can mark a point on a tape that you want to return to following
playback.
1. Set the
Power
switch to
CAMERA
or
PLAYER
.
2. Set the
Mode
switch to
TAPE
.
3. Press the
ZERO MEMORY
button on the remote
control before the recording or during playback at
the point where you wish to return.
■
The time code is changed to a tape counter that
is set to Zero Memory with the
0:00:00
(Zero Memory indicator).
■
If you want to cancel the Zero Memory function,
press the
ZERO MEMORY
button again.
4. Finding the zero position.
■
When you have finished playback, fast forward
or rewind the tape in stop mode.
The tape stops automatically when it reaches
the zero position.
■
When you have finished recording, set the
Power
switch to
PLAYER
and press the
(REW) button.
The tape stops automatically when it reaches the zero position.
5. The tape counter with the
(Zero Memory indicator) disappears
from the display and the tape counter is changed to the time code.
[ Notes ]
■
In the following situations, Zero Memory mode may be canceled
automatically:
-
At the end of the section marked with the Zero Memory function.
-
When the tape is ejected.
-
When you remove the Battery pack or power supply.
■
The Zero Memory may not function correctly where there is a
break between recordings on the tape.
Setting the Zero Memory (SC-D465(B) only)
42
42
ENGLISH
✤
CAMERA
Player
Zero
Memory
✤
1.
CAMERA
PLAYER
2.
TAPE
3.
ZERO MEMORY
■
0:00:00
■
ZERO
MEMORY
4.
■
■
PLAYER
REW
5.
■
-
-
-
■
(
SC-D465(B))
œ
1
