Samsung SC D353 - MiniDV Camcorder w/20x Optical Zoom Page 26 Owner'S Instruction Book Download

Page: 26 / 128

ENGLISH

Preparation

Table of continuous Recording Time based on Model and Battery Type.

✤

If you close the LCD screen, it switches off and the Viewfinder switches on automatically.

✤

The continuous recording times given in the table below are approximations.
Actual recording time depends on usage.

[ Notes ]

■

The Battery pack should be recharged in an environment between 32 °F (0 °C)and 104 °F (40 °C).

■

The Battery pack should never be charged in a room with a temperature that is below 32 °F (0 °C).

■

The life and capacity of the Battery pack will be reduced if it is used in temperatures below 32 °F (0 °C) or left in temperatures
above 104 °F (40 °C)for a long period of time, even when it is fully recharged.

■

Do not put the Battery pack near any heat source (i.e.fire or a heater).

■

Do not disassemble, apply pressure to or heat the Battery pack.

■

Do not allow the

and

–

terminals of the Battery pack to be short-circuited.

It may cause leakage, heat generation, induce overheating or fire.

■

Use SB-LSM80 or SB-LSM160 Battery pack only.

■

It is recommended to use original battery pack that is available at SAMSUNG service center.

Battery

SB-LSM80

SB-LSM160

(AD43-00148A)

Charging

time

Approx.

1hr 20min

Approx.

3hr

LCD ON

VIEWFINDER ON

Continuous recording time

Time

Approx.

1hr 20min

Approx.

2hr 40min

Approx.

1hr 30min

Approx.

3hr

Summary of Contents for SC D353 - MiniDV Camcorder w/20x Optical Zoom

































































































































Search results

Summary of Contents for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Reviews:

Related manuals for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Brands by name

Popular brands

Samsung SC D353 - MiniDV Camcorder w/20x Optical Zoom, Owner'S Instruction Book

Search results

Summary of Contents for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Reviews:

Related manuals for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Brands by name

Popular brands