Samsung SC D353 - MiniDV Camcorder w/20x Optical Zoom Page 13 Owner'S Instruction Book Download

Page: 13 / 128

ENGLISH

Notes and Safety Instructions

Do not film with the camera lens pointing directly at the sun.
Direct sunlight can damage the CCD(Charge Coupled Device).

1. Do not position the Camcorder such that the Viewfinder is pointing towards the sun.

Direct sunlight can damage the inside of the Viewfinder. Be careful when placing the Camcorder under sunlight
or near a window exposed to sunlight.

2. Do not pick up the Camcorder by holding the Viewfinder.
3. Applying excessive force to the Viewfinder may damage it.

1. The LCD screen has been manufactured using high precision

technology. However, there may be tiny dots
(red, blue or green in color) that appear on the LCD screen.
These dots are normal and do not affect the recorded picture
in any way.

2. When you use the LCD screen under direct sunlight or outdoors,

it maybe difficult to see the picture clearly.
If this occurs, we recommend using the Viewfinder.

3. Direct sunlight can damage the LCD screen.

■

To ensure a steady picture while filming, check that the hand strap is properly adjusted.

■

Do not force your hand into the hand strap as you could damage it.

Note regarding the Lens

Notes regarding electronic Viewfinder

Notes regarding ‘Record’ or ‘Playback’ Using the LCD Screen

Notes regarding the Hand Strap

Summary of Contents for SC D353 - MiniDV Camcorder w/20x Optical Zoom

































































































































Search results

Summary of Contents for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Reviews:

Related manuals for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Brands by name

Popular brands

Samsung SC D353 - MiniDV Camcorder w/20x Optical Zoom, Owner'S Instruction Book

Search results

Summary of Contents for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Reviews:

Related manuals for SC D353 - MiniDV Camcorder w/20x Optical Zoom

Brands by name

Popular brands