Confidential
Chapter
2
Installing
System
RF4402d Series Installation Manual v1.0
54
Copyright © 2018, All Rights Reserved.
3
Fix RRH-1 in the same way as the RRH-0.
Figure 50.
Fixing RRH_2 Sector Pole Type (Back to Back Installation 2)
Fixing Wall Type
For 1 Sector
Marking and Drilling for Wall Mounting
To mark on a wall
1
Make sure you have the following items:
Table 17. Tools for Marking
Category
Description
Working Tools
Tape Measure
Permanent Maker
Level
To mount the system on a wall, perform the leveling test by referring to System
Leveling to check the positions are marked to be horizontal or vertical before
drilling. If the result shows they are not horizontal or vertical, modify the marking
positions.
When the position where the system will be placed is determined, place the system
on that position and then mark the positions where anchor bolts will be fixed. This
will reduce marking error range.
1
2
[RRH-0]
[RRH-0]
[RRH-1]
