manualshive.com logo in svg

Samsung R408, User Manual

Share
Download
Samsung R408 User Manual Download Page 92

2

Registered Trademarks

Samsung is a registered trademark of Samsung Co., Ltd.

SENS is a registered trademark of Samsung Electronics Co., Ltd.

Turion, Athlon, Sempron are registered trademarks of the AMD Corporation.

Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation.

“Memory Stick” and

 

 are trademarks of the Sony Corporation.

All other product or company names mentioned herein are registered trademarks of their respective 

companies.

Macrovision Certification

This product incorporates copyright protection technology that is protected by method claims of 

certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and 

other rights owners. Use of this copyright protection technology must be authorized by Macrovision 

Corporation, and is intended for home and other limited viewing uses only unless otherwise 

authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

ENERGY STAR® Partner

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the 

ENERGY STAR® guidelines for energy efficiency.

Summary of Contents for R408

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands