Samsung R408 User Manual Download

Page: 33 / 96

Unintentional Emitter per FCC Part 15

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:(1)

this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

This equipment has been tested and found

to comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generate uses and can

radiate radio frequency energy and if not

installed and used in accordance with the

instructions may cause harmful interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can

be determined by turning the equipment

off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:



Reorient or relocate the receiving

antenna.



Increase the separation between the

equipment and receiver.



Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced

radio/TV technician for help.

If necessary, the user should consult the dealer or an

experienced radio/television technician for additional

suggestions. The user may find the following booklet

helpful: “Something About Interference.”
This is available at FCC local regional offices. Our

company is not responsible for any radio or television

interference caused by unauthorized modifications

of this equipment or the substitution or attachment of

connecting cables and equipment other than those

specified by our company. The correction will be the

responsibility of the user. Use only shielded data cables

with this system.

Summary of Contents for R408

































































































Search results

Summary of Contents for R408

Reviews:

Related manuals for R408

Brands by name

Popular brands

Samsung R408, User Manual

Search results

Summary of Contents for R408

Reviews:

Related manuals for R408

Brands by name

Popular brands