Samsung R408 User Manual Download

Page: 84 / 96

Wireless LAN Specifications (802.11a/b/g, 802.11n Card)

Intel 802.11ABG WLAN



The Name of the Registered Equipment:

Special Low Power Wireless Device for Wireless Data Communication

Systems.

Item

Detailed Specifications

Physical Specifications

Dimensions

30.0 × 50.95mm (Width X Height)

Operating

Temperature And

Humidity

Same as System Operations

Temperature: Bet. 0°C and 70°C, Humidity: Less than 85%

Power Specifications

Power

3.3V

Network Specifications

Compatibility

IEEE 802.11a, IEEE 802.11b, IEEE 802.11g

Operating System

Microsoft Windows XP/Vista

Media Access

Protocol (MAC)

CSMA/CA (Collision Avoidance) with Acknowledgement (ACK)

Security

Wired Equivalent Privacy support (WEP) 64bit/128bit WPA

This device supports the Wireless LAN Security Specifications WPA (Wi-Fi Protected Access) for Wi-Fi. To connect to a

WPA wireless network, you have to configure the settings according to the network connection environment. For detailed

setting information, ask your network administrator.

Summary of Contents for R408

































































































Search results

Summary of Contents for R408

Reviews:

Related manuals for R408

Brands by name

Popular brands

Samsung R408, User Manual

Search results

Summary of Contents for R408

Reviews:

Related manuals for R408

Brands by name

Popular brands