manualshive.com logo in svg

Samsung R408, User Manual

Share
Download
Samsung R408 User Manual Download Page 45

Status Indicators

Num Lock

This turns on when the Num Lock key is pressed 

and numeric keypad is activated.

1

Caps Lock

This turns on when the Caps Lock key is pressed 

allowing capital letters to be typed without holding 

the Shift button down.

2

Scroll Lock

This turns on when the Scroll Lock key is pressed 

and screen scroll is locked.

3

HDD

This turns on when the hard disk is being 

accessed.

4

Wireless LAN

This turns on when the wireless LAN is operating.
You can only use this function after installing Windows 

and the wireless LAN driver.

5

Charge Status

This shows the power source and the battery charge 

status.

Green:

 When the battery is fully charged or the battery is 

not installed.

Red:

 When the battery is being charged.

Off:

 When the computer is running on battery power 

without being connected to AC adapter.

6

Power

This shows the computer operating status.

On:

 When the computer is operating

Blinks:

 When the computer is in Sleep mode.

7

7

6

5

4

3

2

1

Summary of Contents for R408

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands