Samsung QHR Series User Manual Download Page 72

Page: 72 / 114

Sound Adjustment

Configure the

Sound

settings for the product.

This function may not be supported depending on the model.

Sound Mode

→

Sound

→

Sound Mode

→

ENTER

Sound

Sound Mode

Balance

Equaliser

HDMI Sound

Sound on Video Call

Sound Output

Auto Volume

Standard

AV(HDMI)

Current Source

Internal

The displayed image may differ depending on the model.

You can select a sound mode to suit your personal preferences.

•

Standard

: Selects the normal sound mode.

•

Music

: Emphasises music over voices.

•

Movie

: Provides the best sound for movies.

•

Clear Voice

: Emphasises voices over other sounds.

•

Amplify

: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing

impaired.

This function is disabled when

Sound Output

is set to

External

Receiver (HDMI)

Chapter 08

Summary of Contents for QHR Series



















































































































Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands

Samsung QHR Series, User Manual

Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands