Samsung QHR Series User Manual Download Page 101

Page: 101 / 114

101

General

Smart Security

(HDMI-CEC)

HDMI Hot Plug

Custom Logo

Game Mode

DICOM Simulation Mode

Empty Storage

Off

The displayed image may differ depending on the model.

HDMI Hot Plug

This feature is used to activate the time delay to turn on a DVI/HDMI source device.

•

Off

Custom Logo

You can download, select, and set the display time of a custom logo that appears when the product turns on.

•

Custom Logo

You can select a custom logo (image/video) or turn off the custom logo display.

You must download the custom logo from an external USB device to set the custom logo.

•

Logo Display Time

If the type of custom logo is

Image

, you can set the

Logo Display Time

•

Download Logo File

You can download a custom logo into the product from an external USB device.

The file name of the custom logo you want to download must be saved as “samsung” in all small letters.

When there are multiple numbers of external USB connections, the product will attempt to download the

custom logo from the last device that has been connected to the product.

Custom logo file restrictions

•

Images up to 50 MB in size can be used.

– Supported image file: samsung_image.*

– Supported file extensions: jpg, jpeg, bmp, png

•

Videos up to 150 MB in size can be used. The recommendation is under 20 seconds in length.

– Supported video file: samsung_video.*

– Supported file extensions: avi, mpg, mpeg, mp4, ts, wmv, asf

Summary of Contents for QHR Series



















































































































Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands

Samsung QHR Series, User Manual

Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands