Samsung QHR Series User Manual Download Page 90

Page: 90 / 114

Screen Lamp Schedule

Enable or disable the lamp schedule.

•

Off

Schedule 1, Schedule 2

Time

The panel brightness will change to the brightness set in

Lamp

at a specified time.

Lamp

Adjust the panel brightness. A value closer to 100 makes the panel brighter.

•

100

No Signal Power Off

Save power by turning the product off when no signal is received from any source.

This function may not be supported depending on the model.

This function does not operate if the display is in the standby mode.

The product will automatically power off at a specified time. The time can be changed as required.

Auto Power Off

Choose how long the display will wait before turning off after no user interaction is detected.

Eco Solution

Brightness Limit

Energy Saving Mode

Eco Sensor

Screen Lamp Schedule

No Signal Power Off

Auto Power Off

Minimum Backlight

Off

15 minutes

Off (Recommended)

The displayed image may differ depending on the model.

Summary of Contents for QHR Series



















































































































Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands

Samsung QHR Series, User Manual

Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands