Samsung QHR Series User Manual Download Page 63

Page: 63 / 114

Picture Options

Colour Tone

Digital Clean View

HDMI Black Level

Film Mode

Local Dimming

Dynamic Backlight

Off

Auto

Off

High

The displayed image may differ depending on the model.

Local Dimming

Adjust brightness levels of individual on-screen areas for optimum contrast.

•

Off

Low

Standard

High

Models with

Dynamic Backlight

are not supported.

Dynamic Backlight

Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.

•

Off

Models with

Local Dimming

are not supported.

Apply Picture Settings

→

Picture

→

Apply Picture Settings

→

ENTER

Picture

Apply Picture Settings

All Sources

The displayed image may differ depending on the model.

Apply the picture settings to all external devices connected to the device or to the current source only.

•

All Sources

Current Source

Summary of Contents for QHR Series



















































































































Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands

Samsung QHR Series, User Manual

Search results

Summary of Contents for QHR Series

Reviews:

Related manuals for QHR Series

Brands by name

Popular brands