manualshive.com logo in svg

Samsung OfficeServ ITP-5012L, User Manual, Page: 138 / 179

Share
Download
Samsung OfficeServ ITP-5012L User Manual Download Page 138

6

-

50 

 

Chapter6  Application Program Menus 

4.  To check the content of a message, select the message from the message list 

screen and press the [Enter] button. The message is displayed on the screen 
as shown below. Press the up/down direction button to check messages 
longer than the screen size.  

 

 

Figure 6.64  Confirm Message 

 

 
5.  To Reply/Resend/delete  the selected message or all of the messages in the 
Received text message box  press the [Menu] button. 

♦

 

To reply to the message dial [1] and write your message 

♦

 

To resend the message to another user dial [2] and select the user 

♦

 

To delete the message dial [3]. You will be requested to confirm the deletion, 
select OK and press [Enter]. 

♦

 

To delete all received messages dial [4]. You will be requested to confirm the 
deletion, select [OK] and press [Enter]. 

 

Summary of Contents for OfficeServ ITP-5012L




















































































































































































Reviews:

No comments