manualshive.com logo in svg

Samsung OfficeServ ITP-5012L, User Manual, Page: 121 / 179

Share
Download
Samsung OfficeServ ITP-5012L User Manual Download Page 121

6

-

33 

 

 

If the [Enter] button is pressed while on checking the details, the user can modify 
the details immediately. 

 
3.

 

Presses the [Enter] button anda popup menu to modify/add/delete the schedule 
will appear.   

♦

 

Dial [1] to review the the current details. 

♦

 

Dial [2] to add a new schedule. 

♦

 

Dial [3] to modify the details.  

♦

 

 

♦

 

Dial [4] to delete the selected schedule. Then, the “Do you want to remove?” 
message will appear. Select [OK] to delete the schedule. 

 
4.  Press the [End] button to return to the idle screen. 
 

Delete All Schedules 

 
1. Dial [3] from the [E-diary] screen to select [3.Daily Planner]. 

Figure 6.40  Selecting the [Daily planner] Menu 

 
2. Use the direction buttons to select the required date and the scheduled events 

will be indicated on the left of the LCD. Each date with a scheduled event 
will be indicated..  

Summary of Contents for OfficeServ ITP-5012L




















































































































































































Reviews:

No comments