Authentication Server Related Set/Modify
The fifth item
[5. Server]
sets or modifies settings related to the authentication
server. Select the [5. Server] item and move to the lower level. The screen below is
displayed.
You can set/modify the IP address of the authentication server at the [1. Server IP]
item. The screen below is displayed when you enter the item. The server IP is the
IP address of the MCP2.
You can confirm the current IP address of the authentication server at the LCD
panel. The address is left blank if it is not set. Use the dial buttons from [
0
]-[
9
], and
[ ] to set the IP address and press the [
ENTER
] button among the navigation but-
tons to save and exit.
You must input the ID assigned to your ITP phone. See your phone system admin-
istrator to get this value. Press the [
ENTER
] button to save and exit.
You must input the password associated with your ID. See your phone system
administrator to get this value. Press the [
ENTER
] button to save and exit.
Completion of Settings
Verify settings at the first item [1. Information] after setting all of the above items.
Select the sixth item [6. Exit] to save all modified settings and reboot the ITP-
5021D phone.
1.Server IP
Input ServerIP
xxx.xxx.xxx.xxx
Load and Upgrade Set/Modify
The third item
[3. Load & Upgrade]
sets or modifies the IP phone’s software ver-
sion. Use extreme caution when upgrading the keyset.
Select the
[3. Load & Upgrade]
item and move to the lower level. The screen
below is displayed.
Item not visible in the first screen:
In the [
1.Load Option
] item, move to the lower level and select [
2. File System
].
Each of the items [2. Upgrade Program] and [3. Upgrade Bootrom] are used for
upgrading program and bootrom. Set the IP of the TFTP server you wish to
upgrade and press OK.
The [
4. Format
] item is used for deleting all programs and data except bootrom.
CAUTION: For engineering purposes only. The format option should not be used
unless instructed by an Authorized Samsung Engineering or Technical Support
Representative.
1.Load Option
2.Upgrade Program
3.Upgrade Bootrom
4.Format
14
15
4
Input Id
xxxx
4
Input Password
xxxx
Home Page
ITP-5021D
Table of Contents
