IN GROUP/OUT OF GROUP
If your keyset is assigned to a station ring group, you can remove your keyset from
the group and then put it back in. While you are out of the group, you can receive
calls to your extension number but not calls to the group number. If you have an
IN/OUT
key with the group number assigned.
•
Press the
IN/OUT
key. It will light red when your keyset is in the group.
•
Press the
IN/OUT
key again to exit the group and turn the light off. Repeat as
necessary.
If you do not have an
IN/OUT
key:
•
Dial the
IN/OUT
access code number __________, then the group number,
then
0
to exit the group or
1
to enter the group.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press
SPK
or the
MONITOR
key.
The
IN/OUT
key can include an extender to indicate the specific group that this
key will affect. This means that if you are in multiple groups, you can decide for
which groups you will receive calls.
39
When you receive an off-hook voice announcement, if you are using the handset,
you will hear the announcement over the handset receiver. If you are using the
speakerphone, you will hear the announcement over the keyset speaker. In both
cases, you can continue to speak to the original party.
•
Press the flashing
CALL
button on your keyset.This will place the original party
on hold and allow you to talk to the announcing party.
•
To return to your first party, press the key corresponding to your original call.
This will disconnect the OHVA call.
Executive off-hook voice announce allows you to engage in conversation on your
keyset and simultaneously receive and reply handsfree to an OHVA through your
add-on module (AOM). Use caution because the conversation through the AOM
may possibly be heard by the caller on the keyset. When you receive an executive
OHVA through your AOM:
•
Reply by speaking in the direction of the microphone in the AOM unit.
•
Adjust the volume with the
VOL
keys on the AOM unit.
•
Press the
SPK
or the
MONITOR
key on the AOM to disconnect the announcing
party.
NOTES:
1. Executive off-hook voice announce can only be accomplished when an AOM is
attached to your phone.
2. If the
MUTE
key on the AOM is lit, you must press the AOM’s
SPK
key to answer
the OHVA call.
OHVA BLOCK
Your keyset can be programmed with an OHVA Block (
BLOCK
) key. Pressing this
key will prevent anyone from making an OHVA to you until you press the button
again and cancel the blocking.
OHVA REJECT
Your keyset can be programmed with an OHVA Reject (
REJECT
) key. Pressing this
key while receiving an OHVA call will disconnect the voice announcing party and
return you to your original call.
38
Home Page
Table of Contents
DCS Keyset
