Samsung OfficeServ 7200 Programming Manual Download Page 55

Page: 55 / 409

CHAPTER 2. MMC Programming

OfficServ 7200 Programming Guide

Samsung Business Communications

2-24

[112] ALARM REMINDER CLOCK

Allows the system administrator or technician to set or change the alarm clock/appointment

reminder feature for any station. Three alarms may be set for each station and each alarm

may be defined as a one-time or TODAY alarm, or as a DAILY alarm. The TODAY alarm

is automatically cancelled after it rings, while the DAILY alarm rings every day at the same

time. Alarm numbers are 1, 2 and 3. In the case of Station Pair assignments (MMC 740) the

alarm only rings the station that is programmed and does not ring the paired station.

Type

Description

0 NOTSET

alarm

TODAY

Alarm once only

DAILY

Alarm daily at set time

DEFAULT DATA

ALARMS ARE NOTSET

ACTION DISPLAY

1. Press Transfer button and enter 112.

Display shows:

[201] ALM CLK(1)

HHMM:

NOTSET

2. Dial station number (e.g., 205)

[205] ALM CLK(1)

HHMM:

NOTSET

Press Volume button to select station and

press Right Soft button.

3. Dial 1~3 to select alarm (e.g., 1)

[205] ALM CLK(1)

HHMM:

NOTSET

Press Volume button to select alarm and

press Right Soft button.

4. Enter alarm time in 24-hour clock format.

(e.g., 1300 for 1pm)

[205] ALM CLK(1)

HHMM:1300

NOTSET

Summary of Contents for OfficeServ 7200


























































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7200

Reviews:

Related manuals for OfficeServ 7200

Brands by name

Popular brands

Samsung OfficeServ 7200, Programming Manual

Search results

Summary of Contents for OfficeServ 7200

Reviews:

Related manuals for OfficeServ 7200

Brands by name

Popular brands