CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-339
No
Parameter
Description
Default
07 VERSION
WLAN
module
version.
Version
08 TFTP SERVR
WBS UPGRADE Server IP.
0.0.0.0
09 TFTP FILE
WBS UPGRADE file name.
WBS00000.TFP
10 WBS TX PWR
TX POWER of all WBSs.
DEFAULT
19 CLR WBSREG
Initializes registration data of all WBSs.
NO
WBS PARAMETER
There are two types of WBS, the COMBO AP and BASIC AP. A system cannot use both
types of WBS at the same time. The AP type to be used can be set in MMC 849. Depending
on the selected AP type, this program displays COMBO AP (CWBS), and BASIC AP
(BWBS).
y
When using COMBO AP (CWBS)
WBS24 COMBO is connected to a WLI card. Up to three WLI cards can be installed.
(A single WLI card can connect up to eight WBS24 COMBOs.)
y
When using BASIC AP (BWBS)
WBS24 BASIC is connected to the system through the network and requires an MGI
port to provide tone and call path connection.
No
Parameter
Description
Default
00 IP ADDRESS
WBS24 IP address for Ethernet.
0.0.0.0
01 GATEWAY
Gateway address of the WBS24 Network.
0.0.0.0
02 NET MASK
Netmask of the WBS24 Network.
255.255.255.0
03 MAC ADDR
MAC address of WBS24 received by the system
when WBS24 is connected.
FFFF FFFF FFFF
04 VERSION
WBS24 software version.
Version
05 STATUS
Alive operation status.
OFF
06 RF CH.
RF channel no. used by each WBS24 .
1, 6, or 11
07 TX POWER
TX POWER of each WBS.
DEFAULT
09 TIME ZONES
Time zone service for each WBS
00:00
10 PARA CLR
Initializes WBS registration data.
NO
