CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-206
[709] TOLL PASS CODE/SPECIAL CODE TABLE
This MMC provides a means to program trunk code tables as described below.
No
Special Code
Description
0
PBX CODE
This table contains up to five entries and is used to identify the
trunk access codes needed for toll restriction when the system
is used with either a PBX or a CENTREX-supplied dial tone. Toll
restriction will only be applied on trunks flagged as PBX in MMC
401 if a trunk access code entered in this table is dialled. Toll
restriction will be applied to the digits following the trunk access
code.
1
SPECIAL CODE
This table identifies the special feature codes used to activate
central office custom-calling features such as CID Block and
Call Waiting Disable. The special feature codes can be used on
a per-call basis without affecting LCR or toll restriction pro-
gramming. There is a maximum of 10 entries available, each of
which may be up to four digits long.
2
TOLL OVERRIDE
This table of eight entries is used to identify the numbers that
will bypass all dialling restrictions. This bypass includes toll re-
striction, trunk access and forced authorization or account
codes. Each entry in the table can be up to 14 digits long.
3
OVRD USE TRK GRP
This entry designates the trunk group that toll override calls will
access.
DEFAULT DATA
NONE
ACTION DISPLAY
1. Press Transfer button and enter 709.
Display shows:
PBX ACCESS CODE
1:
2. Select PBX, SPECIAL CODE, TOLL OVERRIDE
or OVRD USE TRK GRP.
TOLL OVERRIDE
1:
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3. Enter index number (e.g., 3)
OR
TOLL OVERRIDE
3:_
Press Volume button to make selection and
press Right Soft button to move cursor.
