CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-327
No
Option
Description
Default
10 FRAME
COUNT
This value determines the transmission interval time of
VoIP packets generated by the IP phone. This data
uses MMC 841 ITP DSP PARA DOWN = PHONE DATA
only. The range is 10~40 ms.
20 ms
11 JITTER BUF
Decides the minimum time to consider delay for jitter
adjustment. This data uses MMC 841 ITP DSP PARA
DOWN = PHONE DATA only. The range is 10~90 ms.
20 m
12 TOS FIELD
An 8-bit binary value that will be used by external
routers, switches, etc, (that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the IP phone. This value can
be left at the default value (00000) if your network infra-
structure does not support this method of bandwidth
management. This data uses MMC 841 ITP DSP PARA
DOWN = PHONE DATA only.
All bits 0
13 S/W VERSION
Display IP phone software version. (Read only.)
-
14 S/W UPGRADE This is used as IP phone software upgrade request
command. When YES is selected and Right Soft button
is pressed, the system requests IP phone software up-
grade with TFTP IP address.
-
15 TIME ZONE
Allows remote IP phones to display own time zone.
00.00
16 PUBLIC
TO
PUBLIC
When this option is set to USE MGI, the MGI can be
allocated between remote IPs in the same private zone.
NOT USE MGI
17 SIG TYPE
This option can change UDP/TCP signal type for IPs.
(ITP V3.xx only supports the TCP signal type. If TCP is
set and ITP V2.xx attempts to connect, the TCP signal
type will change from TCP to UDP automatically.)
UDP
18 PRIVATE IP
Displays private IP address of remote IP phone allo-
cated by phone’s router.
-
DEFAULT DATA
SEE DESCRIPTION
