7-10
Manual
Display Related
Q1 The LCD screen is blank.
A Adjust the LCD screen brightness. Use the <Fn> + <
>, <Fn> + <
> keys.
Q2 The screen saver disturbs screen viewing during Media Player or
video file operation.
A Under the Media Player Options, in Player > Enable Screen Saver During Use,
uncheck the box and restart the player.
Q3 In DOS mode, changing the full screen DOS mode by pressing
ALT+Enter key displays a broken image for a short period.
A The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4 In the following cases, the screen blinks or displays noise for a
short time:
(Changing the resolution, changing the display device, removing the AC adapter,
restarting the system)
A This may happen while the video driver is examining the connected device.
Q5 When I connected a projector to the computer and pressed <Fn>+<F4
/ LCD/CRT> keys, display devices are not converted properly.
A1 Press <Fn>+<F4 / LCD/CRT> keys once more.
A2 Convert display devices on [Graphics controller properties] dialog.
(Refer to ‘Using External Display Devices’ (P. 6-8).)
A3 Press <Ctrl>+<Alt>+<F1> keys to change the setting to CRT, or press
<Ctrl>+<Alt>+<F3> keys to change to LCD.
Q6 Extended Desktop is not configured on [Display Properties] dialog. (Start
> Control Panel > Appearance and Themes > Display > Settings tab)
A Change the setting to extended desktop on [Graphics Controller Properties] dia-
log. (Refer to ‘Using External Display Devices’ (P. 6-8).)
Q7 I pressed <Fn>+<F4 / LCD/CRT> keys, then the screen blinks.
A This problem may occur when you pressed <Fn>+<F4 / LCD/CRT> keys to con-
vert display devices while there is no external display device connected.
Connect an external display device first, then convert display devices.
