English - 20
fillinG the Water tank
You will see the water tank on the right-hand side. Only fill the tank with fresh tap
water or with still bottled water. If your water is very hard, we recommend that you use
softened water (see also “Water hardness”).
Caution
Do not fill the water tank with distilled water or any other
liquids.
fill the water tank before
each use
Push the steam door to open it. Lift the water tank over
the interlock and pull the tank out of the appliance. Open
the lid and fill the water tank with cold water up to the
“Max” mark. If you use the measuring jug to fill the water
tank, you don’t have to pull the water tank completely out
of the appliance. Close the lid until you feel it engage.
Slide the water tank back until it engages.
empty the water tank after
each use
Pull the water tank out of the appliance slowly. Pulling it
out quickly may cause water to spill. Hold the water tank
horizontally, so that no remaining water can drip out of
the valve seat.
Empty out the water.
Thoroughly dry the water tank in the appliance and the
seal in the lid.
“fill water tank” display
If the water tank is empty, a signal sounds.
A symbol appears in the display (see the below picture).
The operation is interrupted.
1. Take out the water tank, fill to the “Max” mark and
reinsert.
2. Press
start
.
NQ50C7935ES_EU_DG68-00471E-01_EN.indb 20
2014-10-23 12:02:22
