Samsung NP780Z5E Page 71 User Manual Download

Page: 71 / 153

Chapter 3.

Using the computer

Using SoundAlive (Optional)

The SoundAlive function enables you to experience more

stereophonic sound using stereo speakers.

SoundAlive is only supported in Windows 8.

•

The software programs provider may vary, depending on

•

your computer model.
In addition, some pictures may differ from actual product

•

depending on the computer model and software version.

Right-click over the Volume in the taskbar on the Desktop

and click Play Device.
(Alternatively, click the Charms menu on the Desktop >
Settings

검색

시작

장치

설정

> Control Panel > Hardware and Sound >

Sound.)

Right-click over the Speakers and select Properties.

Select the SoundAlive tab and select one of the modes.

Adjusting the Volume

Summary of Contents for NP780Z5E


























































































































































Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands

Samsung NP780Z5E, User Manual

Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands