Samsung NP780Z5E User Manual Download

Page: 56 / 153

Chapter 3.

Using the computer

Shortcut Keys

Name

Function

Volume Control

Controls the volume.

Keyboard Backlight

Brightness Control

(Optional)

Controls the brightness of the keyboard backlight. This function is only available for models

that support the keyboard backlight feature.

If you use the buttons in a bright location, the “The keyboard backlight brightness

•

cannot be changed due to too bright ambient illumination” message appears.
When it is bright or the illumination sensor is turned on, select

•

Settings > General >

Keyboard Backlight and adjust the backlight brightness.

Silent Mode

Reduces the Fan noise so that users can use the computer without hearing noise.

Airplane Mode

Turns all wireless network devices on or off.

(Only for models with a wireless network device.)

Keyboard

Summary of Contents for NP780Z5E


























































































































































Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands

Samsung NP780Z5E, User Manual

Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands