Samsung NP780Z5E Page 12 User Manual Download

Page: 12 / 153

Chapter 1

Getting Started

Safety Precautions

Warning

Failure to follow instructions marked with this symbol may

cause personal injury and even fatality.

Thereafter, if you connect the AC adapter, the battery power

•

will be supplied again.

Do not cut the battery power under normal

•

conditions.
This may result in data loss or a product

•

malfunction.

The location of the Emergency Hole may differ depending

on the model.

Usage Related

Disconnect all cables connected to the

computer before cleaning it.

If your

notebook is external & removable battery

type, remove the external battery.
There is a danger of electric shock or damage

to the product.

Do not connect a phone line connected to a

digital phone to the modem.
There is a danger of a electric shock, fire or

damage to the product.

Do not place any container filled with water or

chemicals over or near the computer.
If water or chemicals enter the computer, this

may cause fire or electric shock.

If the computer is broken or dropped,

disconnect the power cord and contact a

service center for a safety check.
If the notebook computer has an external

type (removable) battery, separate the

battery also.
Using a broken computer may cause electric

shock or fire hazard.

Summary of Contents for NP780Z5E


























































































































































Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands

Samsung NP780Z5E, User Manual

Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands