78
Chapter 3.
Using the computer
Initializing the TPM chip
When you use the TPM function for the first time or you want to
register the user again, you have to initialize the TPM chip.
Initializing the TPM chip erases all authentication
•
information saved on the TPM chip. Any decision to
initialize must be taken carefully.
To initialize the TPM chip again while the TPM function is
•
in use, you have to decrypt any existing files and folders
encrypted by the TPM function first. Otherwise, you
will not be able to access the files and folders after re-
initialization.
1
Restart the computer.
When the Samsung logo screen appears, press the F2 key
repeatedly.
2
If the BIOS screen appears, select the Security > TPM
Configuration item and press Enter.
Aptio Setup Utility
SysInfo
Supervisor Password
User Password
HDD Password
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
Advanced
Security
Boot
Clear
Clear
Clear
[Enter]
[Enter]
[Enter]
[Enabled]
▶
TPM Configuration
Exit
3
Set the TPM Support item to Enabled and set the Change
TPM Status to Clear.
Aptio Setup Utility
TPM Configuration
TPM Support
Change TPM Status
Security Chip State
Security
[Enabled]
[
No Change
]
Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
4
Press the F10 key to save the changes.
Using the TPM Security Device
(Optional)
Summary of Contents for NP780Z5E
Page 1: ...User Guide ...
