Samsung NP780Z5E User Manual Download

Page: 105 / 153

104

Chapter 4.

Settings and Upgrade

Battery

Measuring the Remaining Battery Charge

You can view the battery charge status by completing the

following procedures.

Confirming the battery charge in the Taskbar

Disconnect the AC adapter and move the mouse cursor over

the battery icon in the system tray of the Taskbar to confirm the

remaining battery charge.

Battery Usage Time Information

A battery is an expendable supply, so when using it over a long

time, the capacity/battery life is shortened. If the battery life is

reduced to under half of its initial time, we recommend purchasing

a new battery.
When not using the battery for a long time, store the battery after

charging it to 30-40% of its capacity. This extends the battery life

time.

Extending the Battery Usage Time

Decreasing the LCD Brightness

Click the Charms menu > Settings

검색

시작

장치

설정

> Screen

Adjustment icon

한

Adjust the brightness with the screen brightness control bar.

The battery life will be extended.

Summary of Contents for NP780Z5E


























































































































































Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands

Samsung NP780Z5E, User Manual

Search results

Summary of Contents for NP780Z5E

Reviews:

Related manuals for NP780Z5E

Brands by name

Popular brands