Troubleshooting 83
Questions and Answers
This section provides information on possible problems, solutions and other references
for system use.
Windows Related
Q1 The system does not shutdown properly.
A
When the system does not shutdown normally, press and hold the Power button
until the system manually shuts off. If the Power-Saving Mode is configured into
the Power button, press and hold for more than 4 seconds to shut the system off.
When the system is turned on after such manual shutdown, Scandisk will run to
check errors in the system.
Q2 The system freezes during program operation
A1
There is an error with the program currently being used. Press the <Ctrl>, <Alt>,
and <Delete> keys simultaneously and click and Task in the [Windows Task
Manager] window.
A2
There is an error with the Windows OS. Reboot the system by using the Power
button.
Q3 The USB device does not work properly.
A
The P30 system supports only standard USB devices that use a current of up to
500mA without using external power. Therefore, USB devices that consume
more than 500mA without using external power are not supported.
Q4 The system enters rest mode when operating on battery power if the battery
charge is too low.
A
Connect the AC power immediately. Operating in rest mode for a long period of
time may cause loss of data.
