Samsung NP30 User Manual Download Page 112

Page: 112 / 128

Troubleshooting 99

Reinstalling Software

If you have reinstalled the Windows operating system, or the system and program do
not operate properly, you can re-install the driver and program using the system
software CD.

The drivers and programs included in the system software CD are listed in the
D:\ReadMe.htm file. (Provided that the name of CD-ROM drive is "D".)

Running the system software CD

Insert the system software CD into the CD-ROM drive. The initial screen appears
automatically.

Installing drivers

In the initial screen, click

Driver Installation

Select the driver you want to install from the device installation screen, and click

Install Now

How can one install the drivers for operating systems other than
Windows XP?

Install the appropriate driver software included in the system software CD.

Installs device drivers

Installs programs

Summary of Contents for NP30

































































































































Search results

Summary of Contents for NP30

Reviews:

Related manuals for NP30

Brands by name

Popular brands

Samsung NP30, User Manual

Search results

Summary of Contents for NP30

Reviews:

Related manuals for NP30

Brands by name

Popular brands