Troubleshooting 93
through a computer-to-computer (Ad Hoc) network should be configured so that
their IP addresses are within the same subnet range.
- If the IP address is configured to DHCP (Obtain an IP address automatically) in
TCP/IP properties, IP address is configured within the same subnet range
automatically.
- If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter, configure
IP address:10.0.0.1~10.0.0.254, and Subnet mask: 255.255.0.0, and then try
again.
Q8 When using a computer-to-computer (Ad Hoc) network, sometimes I cannot
search the access point.
A
It may happen occasionally when you are using a computer-to-computer (Ad
Hoc) network connection. Even if you cannot find some access points, the
computer-to-computer (Ad Hoc) network is operating properly. Click Refresh to
view the latest search result.
Q9 Running Help file while running Profile Wizard in the wireless LAN
program (PROSet) makes the PROSet window white.
A
It will be displayed properly when you finish the profile wizard. It dose not affect
the program operation.
Q10 The network does not operate properly when both the wireless and the wired
network connections are simultaneously configured with the same IP
address.
A
You cannot use the wireless and the wired network connections using the same
IP address simultaneously. To use either the wireless or the wired network in turn
with the same IP address, you have to Disable whichever network device will not
be using in the network connection of the Control Panel.
Q11 The wireless LAN does not operate properly when there are other products
operating in the 2.4GHz band.
A
Devices compliant with IEEE 802.11b, operate in the public frequency, ISM
band. Therefore some channel interference may happen when there are other
devices using the same frequency band such as a wireless video transceiver, a
microwave oven, etc. If other products cause channel interference, changing the
AP channel is recommended.
