182
Q
When I am connected to a 100Mbps/1Gbps wired LAN and the computer exits
Sleep/hibernation mode, a message appears informing you of a connection
to a 10Mbps/100Mbps wired LAN.
A
When the computer exits standby/hibernate mode, restoring the network takes
about 3 seconds.
When the network is restored, it operates at 100Mbps/1Gbps.
Q
Configure the options below to use the network at its maximum speed.
A
Click
Start > Control Panel > System and Maintenance > System > Device
Manager
. Double-click
Network Adapter > Marvell Yukon 88E8036 PCI-E Fast
Ethernet Controller
, click
Advanced
, configure as follows and then click the
OK
button.
1) BatteryModeLinkDetection : Energ™
2) BatterySpeedSettings : FullSpeed